Daya Bay Nuclear Power Station will not repeat the mistakes of Fukushima in the event of extreme accidents.

On March 24th, the staff explained the principle of nuclear power generation to media representatives. On the same day, at the invitation of Daya Bay Nuclear Power Operation Management Co., Ltd., more than 50 journalists from various media in Hong Kong formed a visiting group to visit Daya Bay Nuclear Power Station and held discussions with nuclear safety and emergency experts. Nuclear safety experts at Shenzhen Daya Bay Nuclear Power Base said that the power station of Daya Bay Nuclear Power Base has both site selection and design.

This is a panoramic view of Daya Bay Nuclear Power Station taken on March 24th. Xinhua News Agency reporter Li Qiuchan photo

The recent nuclear accident at Fukushima nuclear power plant has caused serious consequences. As the first large-scale commercial nuclear power plant in China, Daya Bay nuclear power plant has naturally attracted more attention: Can it resist extreme natural disasters such as earthquake and tsunami?

In this regard, relevant experts pointed out that Daya Bay Nuclear Power Station has five barriers, and its safety level and overall response capacity to serious accidents are significantly higher than those of Fukushima Nuclear Power Station, and there will be no consequences similar to those of Fukushima Nuclear Power Station in extreme accidents.

First, the technical route is different. Boiling water reactor has no steam generator, and the steam generated by boiling water directly drives the steam turbine. During normal operation, the steam is radioactive, and once it fails, the radioactivity will increase, making inspection and maintenance difficult. According to Pu Jilong, an expert from the National Nuclear Power Major Special Committee, the accident unit of Fukushima nuclear power plant adopts the old-fashioned single-layer circulating boiling water reactor, and the cooling water is directly introduced into the seawater cooling primary circuit, which belongs to the early nuclear power technology built in the late 1960s and early 1970s.

Pu Jilong said that Daya Bay nuclear power plant adopts pressurized water reactor technology, which fully draws lessons from the experience of the accident of Three Mile Island nuclear power plant in the United States in 1979 and the accident of Chernobyl nuclear power plant in the Soviet Union in 1986. The technology has been greatly improved, with the characteristics of high safety, advanced and reliable technology and so on. It belongs to a relatively advanced nuclear power plant built after the 1990s. At present, there are more than 70 similar units in operation all over the world, and accumulated more than 1000 years of experience in the operation of the same type of nuclear power units.

Second, special safety facilities are different. Pu Jilong said that the Fukushima nuclear power plant used the technology 40 years ago, and the reactor containment space was small, only about 3,400 cubic meters. In the case of serious accidents, the booster process was fast and hydrogen explosion was prone to occur.

The containment of Daya Bay Nuclear Power Station is composed of reinforced concrete cylinders with a space of 49,000 cubic meters, which can effectively reduce and dilute the hydrogen concentration and delay the pressurization time of the containment. At the same time, a hydrogen elimination system is installed in the containment, and dozens of hydrogen recombiners to deal with hydrogen risks can eliminate the risk of hydrogen explosion caused by hydrogen accumulation in the containment under serious accidents.

In addition, Daya Bay Nuclear Power Station is also equipped with a sand filter. Under extreme working conditions, if the containment pressure exceeds the design value, the sand filter can discharge the gas in the containment to the atmosphere, and the sand filter can retain most of the radionuclides in the gas to prevent the radioactive substances in the primary circuit from being released to the environment directly out of control.

Third, the geological conditions are different. According to Li Zhongcheng, an expert from the National Energy and Nuclear Power Engineering Technology Research and Development Center, Japan is located at the junction of the Asia-Europe plate and the Pacific plate, where the Pacific plate is subducting to the Asia-Europe plate, and the crustal movement is active. Strong earthquakes mainly occur in the plate subduction and collision zones.

The site of Daya Bay Nuclear Power Base was selected from more than 10 alternative sites in the coastal areas of Guangdong Province. It is located in the coastal zone in the southeast of Eurasian plate, far from the south-north tectonic belt with strong structural deformation and the subduction zone of Philippine Sea plate. There is no fault zone near the site, and the crust is safe and stable. There has never been an earthquake exceeding magnitude 5 on the Richter scale in history.

Fourth, the ability to cope with the tsunami is different. The Fukushima nuclear power plant in Japan was safe and controllable after the earthquake, and the related plants and facilities were basically complete. According to the current accident analysis, the tsunami flooded the diesel engine, which led to the uncontrollable accident and gradually deteriorated. Therefore, whether Daya Bay Nuclear Power Station can cope with similar tsunami is a concern of the outside world.

Li Zhongcheng said that Daya Bay belongs to the marginal sea. Because the seawater is not deep enough, it is only 20 to 30 meters, and the spread of tsunami requires a water depth of nearly 1,000 meters. Generally, there is an "island arc" between the marginal sea and the open sea. The "island arc" is a series of island chains, and the tsunami caused by seismic waves can only be transmitted from the gaps in the island chains, with limited energy. The highest tsunami recorded on the coast of China is below 0.5 meters, so there will be no strong tsunami similar to that in Japan at the Daya Bay nuclear power plant site.

The biggest natural disaster risk faced by nuclear power plant sites in China’s coastal areas is super typhoon. Daya Bay Nuclear Power Station is located in an area where tropical typhoons often occur. The design benchmark flood control water level of the plant site is the sum of astronomical high tide level exceeding the probability of 10%, possible maximum storm surge water increase and sea level rise during the life of the power plant.

Secondly, Daya Bay Nuclear Power Station’s ability to cope with tsunami is also higher than that of Fukushima Nuclear Power Station. Even if the Daya Bay Nuclear Power Station loses all the power sources inside and outside the plant, it can use the steam generated by the secondary loop through the core waste heat to drive the steam-driven feed pump related to nuclear safety to supply water to the steam generator. At the same time, the secondary loop is equipped with an atmospheric exhaust system, which can cool the reactor core through natural circulation after power failure and discharge heat to the atmosphere to avoid the continuous rise of temperature and pressure in the reactor pressure vessel. In addition, Daya Bay Nuclear Power Station is equipped with two emergency diesel engines for each unit according to the standard, and a fifth diesel engine is also equipped for standby. In addition, the problem of mobile power supply is also being considered.

Fifth, long-term adherence to the nuclear safety culture of "safety first". Jiang Xinghua, director of Daya Bay Nuclear Power Station, said that the principle of "safety first, quality first" has always been implemented in the production and construction process of Daya Bay Nuclear Power Station, which regards safety as the lifeline of nuclear power and respects and guards nuclear safety with a spirit of being highly responsible to the country and society. When other work elements conflict with safety, they must give way unconditionally. At any time and under any circumstances, we should put safety and quality first, and do not exchange quality for progress or safety for power generation. For example, shortly after the start of Daya Bay Nuclear Power Station in September 1987, quality inspectors found that some steel bars were leaked from the raft foundation of the nuclear island. In order to ensure the quality of engineering construction, Daya Bay Nuclear Power Station has been rectified for one month at the cost of $1 million per day of shutdown. In February, 1995, when Unit 1 of Daya Bay Nuclear Power Station carried out the rod drop test, the staff found that the rod drop time of a few control rods was different from the design standard. Although the test results were within the safety margin and did not affect the unit operation, Daya Bay Nuclear Power Station decisively stopped the unit, opened the reactor pressure vessel for treatment five times, thoroughly found out the reasons for the deviation and made proper improvements before starting the unit operation. The handling of this incident lasted for five months, and it paid a great economic price, but in exchange for the good reputation of Daya Bay Nuclear Power Station, such as safety first, seriousness, conservative decision-making, "zero tolerance, zero defects and zero mistakes".

Daya Bay Nuclear Power Station is located in Dapeng Peninsula, Longgang District, Shenzhen City, Guangdong Province. Construction started in 1987 and it was put into commercial operation in 1994. It is the first large-scale commercial nuclear power station in China. Since the unit was put into production, it has maintained safe and stable operation. Since 1999, Daya Bay Nuclear Power Station has won 21 first prizes in 64 international safety performance challenges of similar units. (Reporter Peng Yong)

The Ministry of Industry and Information Technology and other 11 departments deployed "joint action" to promote the integration and innovation of large, medium and small enterprises.

  According to "Gongxin Weibo" WeChat WeChat official account news, the Ministry of Industry and Information Technology, the National Development and Reform Commission, the Ministry of Science and Technology, the Ministry of Finance, the Ministry of Human Resources and Social Security, the People’s Bank of China, the State-owned Assets Supervision and Administration Commission of the State Council, the General Administration of Market Supervision, China Banking and Insurance Regulatory Commission, the All-China Federation of Industry and Commerce, China National Intellectual Property Administration and other eleven departments recently jointly issued the Notice on Carrying out "Joint Action" to Promote the Financing and Innovation of Large, Medium and Small Enterprises (2022-2025). It is clear that the innovation chain, industrial chain, supply chain, data chain, capital chain, service chain and talent chain of large, medium and small enterprises will be fully integrated through departmental linkage, up-and-down promotion and market drive, and efforts will be made to build an enterprise development ecology in which large, medium and small enterprises are interdependent and mutually promoted, enhance the resilience and competitiveness of the industrial chain supply chain, and enhance the modernization level of the industrial chain. It is proposed that by 2025, large enterprises will be guided to create a number of typical financing models for large, medium and small enterprises through ecological construction, base cultivation, internal incubation, empowerment and data connectivity. Stimulate the emergence of a number of specialized and innovative small and medium-sized enterprises with outstanding synergy; Through policy guidance, mechanism construction and platform building, we will promote the formation of a coordinated, efficient, integrated and smooth innovation ecology for large, medium and small enterprises, and strongly support the supply chain of the industrial chain to strengthen the chain.

  The following is the full text of the notice:

Notice on Carrying out "Joint Action" to Promote Financing and Innovation of Large, Medium and Small Enterprises (2022-2025)

No.54 [2022] of the Ministry of Industry and Information Technology

  Provinces, autonomous regions, municipalities directly under the central government and cities specifically designated in the state plan, the competent departments of small and medium-sized enterprises of Xinjiang Production and Construction Corps, the development and Reform Commission, the Science and Technology Department (bureau), the Finance Department (bureau), the Human Resources and Social Security Department (bureau), the State-owned Assets Supervision and Administration Commission, the Market Supervision Bureau, the Intellectual Property Office and the Federation of Industry and Commerce; China People’s Bank Shanghai Headquarters, branches, business management departments, city center branches of provincial capitals, sub-provincial city center branches, and banking insurance regulatory bureaus:

  In order to implement the 14th Five-Year Plan for National Economic and Social Development in People’s Republic of China (PRC) and the Outline of Long-term Goals in 2035 and the 14th Five-Year Plan for Promoting the Development of Small and Medium-sized Enterprises, to promote the leading role of large enterprises, and to promote the integration and innovation of large, medium and small enterprises in the upper, middle and lower reaches of the industrial chain, the relevant matters concerning "joint action" to promote the integration and innovation of large, medium and small enterprises are hereby notified as follows.

  one

  General requirements

  (A) the guiding ideology

  Guided by Socialism with Chinese characteristics Thought of the Supreme Leader in the New Era, in accordance with the decision-making arrangements of the CPC Central Committee and the State Council, based on the new development stage, we will implement the new development concept completely, accurately and comprehensively, build a new development pattern, promote the comprehensive integration of innovation chain, industrial chain, supply chain, data chain, capital chain, service chain and talent chain of large, medium and small enterprises through departmental linkage, up and down promotion and market drive, and strive to build an enterprise development ecology in which large, medium and small enterprises are interdependent and mutually promoting.

  (2) Action objectives

  By 2025, we will guide large enterprises to create a number of typical financing models for large, medium and small enterprises through ecological construction, base cultivation, internal incubation, empowerment and data connectivity; Stimulate the emergence of a number of specialized and innovative small and medium-sized enterprises with outstanding synergy; Through policy guidance, mechanism construction and platform building, we will promote the formation of a coordinated, efficient, integrated and smooth innovation ecology for large, medium and small enterprises, and strongly support the supply chain of the industrial chain to strengthen the chain.

  two

  Key tasks

  (A) innovation as the guide, to create large, medium and small enterprises in innovation chain.

  1. Promote collaborative innovation. Promote large enterprises, small and medium-sized enterprises, joint research institutes, universities and other institutions to form a number of innovative consortia integrating large and medium-sized enterprises and Industry-University-Research, encourage undertaking major scientific and technological projects, and strengthen the research and development of common technologies. We will promote the establishment of innovative technology expert advisory committees by relying on technical experts from large enterprises, professors and scholars from universities and colleges, and carry out technical consultation and guidance for small and medium-sized enterprises. Set up a track race in the "Maker China" SME Innovation and Entrepreneurship Competition, and promote the innovation cooperation of large and medium-sized enterprises through "publishing the list" by large enterprises and "exposing the list" by small and medium-sized enterprises. (The Development and Reform Commission, the Ministry of Science and Technology, the Ministry of Industry and Information Technology, the Ministry of Finance and relevant local departments are responsible according to the division of responsibilities, and the following are required to be implemented by relevant local departments, and are no longer listed)

  2. Promote the sharing of innovative resources. Guide large enterprises to open brands, design and research capabilities, instruments and equipment, test sites and other innovative resource elements to small and medium-sized enterprises, share production capacity resources, and strengthen support for innovation of small and medium-sized enterprises. (The Development and Reform Commission, the State-owned Assets Supervision and Administration Commission and the All-China Federation of Industry and Commerce are responsible for the division of responsibilities)

  3. Promote the transformation of innovation achievements. Promote the free opening of all kinds of scientific and technological achievements transformation project libraries and databases to small and medium-sized enterprises, improve the two-way docking mechanism of scientific research achievements supply and demand, and promote the transfer and transformation of government-supported scientific and technological project research and development achievements to small and medium-sized enterprises. Fully listen to the opinions of small and medium-sized enterprises in the establishment of science and technology plans and support them to undertake projects. Encourage large enterprises to try and use innovative products of small and medium-sized enterprises first, and promote the demonstration and application of supporting products of small and medium-sized enterprises in the first set of major technical equipment. (The Ministry of Science and Technology, the Ministry of Industry and Information Technology, the State-owned Assets Supervision and Administration Commission and the All-China Federation of Industry and Commerce are responsible for the division of responsibilities)

  4. Promote the layout of standards and patents. Promote large enterprises to formulate and improve national standards and industry standards in conjunction with small and medium-sized enterprises, actively participate in international standardization activities, and cooperate with upstream and downstream enterprises in the global industrial chain to jointly establish international standards. Guide large enterprises and small and medium-sized enterprises to strengthen cooperation in the field of intellectual property rights and jointly improve the patent layout of the industrial chain. (The Ministry of Industry and Information Technology, the State-owned Assets Supervision and Administration Commission, the General Administration of Market Supervision, China National Intellectual Property Administration and the All-China Federation of Industry and Commerce are responsible for the division of responsibilities)

  5. Promote green innovation and upgrading. Promote large enterprises to deepen the concept of low-carbon development, improve the efficiency of resource utilization and improve the overall green development level of the industrial chain by optimizing procurement standards and strengthening technical support for energy conservation and emission reduction. (The Development and Reform Commission, the Ministry of Industry and Information Technology, the State-owned Assets Supervision and Administration Commission and the All-China Federation of Industry and Commerce are responsible for the division of responsibilities)

  (B) to enhance resilience and competitiveness as the focus, to consolidate the industrial chain of large, medium and small enterprises.

  1. Collaborate to break through the problem of industrial chain breakpoints blocking points. Sort out the weak links in the industrial chain and the supporting needs of large enterprises, organize specialized and innovative small and medium-sized enterprises to carry out technical research and prototype research and development, and guide small and medium-sized enterprises to accurately repair the chain. Give priority to supporting large, medium and small enterprises to jointly declare key products, process "one-stop" application demonstration and other industrial base reconstruction projects. Create a better environment and support the research and development of innovative and high-tech SMEs. (The Ministry of Science and Technology, the Ministry of Industry and Information Technology, the State-owned Assets Supervision and Administration Commission and the All-China Federation of Industry and Commerce are responsible for the division of responsibilities)

  2. Give play to the leading role of large enterprises. Promote large enterprises to build small and micro enterprise innovation bases and high-quality modern industrial chain parks, help supporting small and medium-sized enterprises to improve their technological processes, quality management and product reliability, and drive them to deeply integrate into the industrial chain through equity investment, resource sharing and channel sharing. Encourage large enterprises to cultivate internal entrepreneurial teams and establish more small and medium-sized enterprises around the industrial chain. (The Development and Reform Commission, the Ministry of Industry and Information Technology, the State-owned Assets Supervision and Administration Commission and the All-China Federation of Industry and Commerce are responsible for the division of responsibilities)

  3. Improve the supporting capacity of SMEs. Sort out the industrial chain map of the "little giant" enterprises that specialize in specialty and innovation, and connect with large enterprises according to the industrial chain organization to help small and medium-sized enterprises integrate into the industrial chain of large enterprises. Under the same conditions, small and medium-sized enterprises that provide core products or services to key leading enterprises in key industrial chains will be given priority as "small giant" enterprises with specialization and novelty, and support for specialized and novelty small and medium-sized enterprises will be strengthened through central and local finance. (The Development and Reform Commission, the Ministry of Industry and Information Technology and the Ministry of Finance are responsible for the division of responsibilities)

  4. Create a regional ecology of financial development. Publish the industrial transfer guidance catalogue, build and improve the modern industrial development pattern with complementary advantages and reasonable division of labor, promote the rapid response and efficient coordination of the industrial chain supply chain, and optimize and improve the efficiency of resource allocation. Cultivate advanced manufacturing clusters and characteristic industrial clusters of small and medium-sized enterprises, and create a coordinated ecology of cross-regional integrated industrial chains around economic belts (circles) and urban agglomerations. (The Development and Reform Commission and the Ministry of Industry and Information Technology are responsible according to the division of responsibilities)

  (C) market-oriented, extending the supply chain of large, medium and small enterprises

  1. Strengthen the supply and demand docking of the supply chain. We will carry out docking activities between large enterprises and specialized small and medium-sized enterprises, promote the holding of "100-game Fair for Small and Medium-sized Enterprises" in various places, promote industrial e-commerce to jointly hold online trading activities for industrial products, guide large enterprises to release procurement requirements for small and medium-sized enterprises, and promote the deepening and expansion of supply chain cooperation between small and medium-sized enterprises and large enterprises. Give full play to the role of industry associations, chambers of commerce, platform enterprises and enterprise information inquiry institutions, promote large, medium and small enterprises to strengthen the supply and demand docking of products and technologies through market-oriented mechanisms, and gradually establish cross-industry and cross-industry supply and demand docking mechanisms and cooperation platforms. (The Ministry of Industry and Information Technology, the State-owned Assets Supervision and Administration Commission and the All-China Federation of Industry and Commerce are responsible according to the division of responsibilities)

  2. Improve the supply chain cooperation mechanism. Guide platform enterprises to improve the benefit sharing mechanism of upstream and downstream enterprises in the supply chain, and create a vivid development situation of "big rivers are full of water and small rivers are full of water". Guide social service agencies such as credit reporting agencies to explore the provision of SME credit evaluation and risk management services for large enterprises, and stimulate the enthusiasm of large enterprises for cooperation. Guide large enterprises to establish and improve the early warning mechanism of supply chain in conjunction with small and medium-sized enterprises to jointly improve the stability and competitiveness of supply chain. (The Ministry of Industry and Information Technology, the People’s Bank of China, the State-owned Assets Supervision and Administration Commission and the All-China Federation of Industry and Commerce are responsible for the division of responsibilities)

  (D) Digital-driven, open up the data link of large, medium and small enterprises.

  1. Give play to the digital traction function of large enterprises. Encourage large enterprises to build a digital service platform that conforms to the characteristics of small and medium-sized enterprises, promote the development of a number of small, fast, lightweight and accurate low-cost industrial chain supply chain collaborative solutions and scenarios, and promote a number of high-quality industrial apps suitable for small and medium-sized enterprises. Carry out pilot demonstration actions of intelligent manufacturing, select a number of intelligent manufacturing demonstration factories and typical scenarios, and promote the overall intelligent level of the industrial chain. Encourage large enterprises to drive small and medium-sized enterprises to cooperate in technological transformation and upgrading, and enhance the technological transformation ability of small and medium-sized enterprises. (The Development and Reform Commission, the Ministry of Industry and Information Technology, the State-owned Assets Supervision and Administration Commission and the All-China Federation of Industry and Commerce are responsible for the division of responsibilities)

  2. Improve the digital level of SMEs. In-depth implementation of small and medium-sized enterprises digital empowerment special action, carry out intelligent manufacturing activities into the park, release the evaluation standards and evaluation models of small and medium-sized enterprises digital transformation level, and guide small and medium-sized enterprises digital transformation, guide small and medium-sized enterprises to deepen the transformation concept, clarify the transformation path, enhance the transformation ability, and accelerate the process of digital network intelligent transformation. (Ministry of Industry and Information Technology and Ministry of Finance are responsible)

  3. Enhance the supporting role of industrial Internet. In-depth implementation of the industrial internet innovation and development action plan, cultivate a number of dual-span industrial internet platforms, promote the expansion of vertical industrial internet platforms and deepen the functional role of serving large, medium and small enterprises, promote the ubiquitous connection, flexible supply and optimal allocation of various production factors, strengthen the digital analysis and intelligent monitoring of large, medium and small enterprises in the industrial chain, and promote the integration and online sharing of manufacturing capabilities in the industrial chain. (The Ministry of Industry and Information Technology, the State-owned Assets Supervision and Administration Commission and the All-China Federation of Industry and Commerce are responsible according to the division of responsibilities)

  (E) Take finance as a link to optimize the capital chain of large, medium and small enterprises.

  1. Innovative industrial chain supply chain financial services. Improve the financial service mechanism of industrial chain supply chain, encourage financial institutions to develop financial products such as credit and insurance according to the characteristics of key industrial chain supply chain, and strengthen the financing services of supply chain accounts receivable, orders, warehouse receipts and inventory. (The People’s Bank of China and China Banking and Insurance Regulatory Commission are responsible for the division of responsibilities)

  2. Promote full chain support for direct financing. Guide all kinds of industrial investment funds to increase combined linkage investment in upstream and downstream enterprises of the industrial chain supply chain, strengthen financing support for the whole industrial chain, and give full play to the advantages of resource agglomeration to provide various value-added services for small and medium-sized enterprises. (The Development and Reform Commission and the Ministry of Industry and Information Technology are responsible according to the division of responsibilities)

  3. Guide large enterprises to strengthen supply chain financial support. Promote large enterprises to support and cooperate with upstream and downstream small and medium-sized enterprises to carry out supply chain financing, and help alleviate the financing difficulties of small and medium-sized enterprises. Guide large enterprises to strengthen compliance management, and shall not abuse their dominant position in the market to set unreasonable payment conditions and time limits, and standardize the payment of accounts for small and medium-sized enterprises. (The Ministry of Industry and Information Technology, the People’s Bank of China, the State-owned Assets Supervision and Administration Commission and the All-China Federation of Industry and Commerce are responsible for the division of responsibilities)

  (six) supported by the platform carrier, expand the service chain of large, medium and small enterprises.

  1. Build a professional innovation platform. Encourage all localities to cultivate innovative platforms and bases for large, medium and small enterprises, and promote cooperation and docking between upstream and downstream enterprises in the industrial chain. Guide large, medium and small enterprises to further enhance the service ability of financing development and provide strong support for financing innovation. Strengthen the construction of university science parks and all kinds of creative spaces, and promote the efficient allocation and effective integration of all kinds of innovative elements. (The Development and Reform Commission, the Ministry of Science and Technology and the Ministry of Industry and Information Technology are responsible for the division of responsibilities)

  2. Promote various platforms to strengthen innovative services. Guide the national manufacturing innovation center, industrial innovation center and technological innovation center to incorporate the promotion of financial innovation into their work objectives, guide the public service demonstration platform for small and medium-sized enterprises and the manufacturing dual-innovation platform to set up service products or projects to promote financial development, and strengthen service support for financial innovation. (The Development and Reform Commission, the Ministry of Science and Technology and the Ministry of Industry and Information Technology are responsible for the division of responsibilities)

  3. Cultivate an international cooperation service platform. Build a cross-border matching platform for SMEs, build an overseas service system for SMEs based on large enterprises, drive SMEs to go to sea together, improve their transnational operation ability and level, and integrate into the global industrial chain supply chain. (The Ministry of Industry and Information Technology, the State-owned Assets Supervision and Administration Commission and the All-China Federation of Industry and Commerce are responsible according to the division of responsibilities)

  (seven) to improve the talent chain of large, medium and small enterprises with team building as the starting point.

  1. Strengthen talent training and introduction. Implement the special talent plan and select a group of innovative entrepreneurs, advanced manufacturing technology talents and advanced basic technology talents. Increase the introduction of overseas high-level talents and support the upstream and downstream enterprises in the industrial chain to cultivate, attract and retain key talents. Organize and implement the project of strengthening manufacturing skills, improve the training, evaluation, use and incentive system of manufacturing skilled personnel, and build a team of manufacturing skilled personnel with sufficient quantity, reasonable structure and exquisite skills. (Ministry of Industry and Information Technology, Ministry of Human Resources and Social Security and State-owned Assets Supervision and Administration Commission are responsible)

  2. Promote talent sharing. Promote large enterprises to build their own schools or join forces with social forces to establish talent colleges, online learning platforms, public training bases, etc., create a professional, open and shared training platform, and strengthen the training of talents for small and medium-sized enterprises in the industrial chain. Encourage large enterprises to set up high-skilled personnel training bases and skill master studios, cultivate high-skilled leading talents, and lead the construction and development of high-skilled personnel teams. Explore the establishment of a mechanism for part-time guidance and regular stationing of technical experts from large enterprises and research institutes to small and medium-sized enterprises (The Ministry of Industry and Information Technology, the Ministry of Human Resources and Social Security, the State-owned Assets Supervision and Administration Commission and the All-China Federation of Industry and Commerce are responsible for the division of responsibilities)

  3. Improve the talent team’s innovative ability. Guide large enterprises to carry out talent exchange and training activities, and strengthen the exchange of talent ideas, technology and management in large, medium and small enterprises. We will set up training courses for leading talents of small and medium-sized enterprises to promote the integration and innovation of large and medium-sized enterprises, and help management personnel to broaden their vision of integration and development, deepen their thinking of integration and development, and enhance their ability of integration and docking. Implement the training project of digital technology engineers, accelerate the training of talents in the field of digital technology, and promote the integration and development of digital economy and real economy. Plan to build a number of practice bases for training outstanding engineers, and create a training model for outstanding engineers to meet the needs of innovation. (Ministry of Industry and Information Technology, Ministry of Human Resources and Social Security, State-owned Assets Supervision and Administration Commission and National Federation of Industry and Commerce are responsible)

  three

  job requirement

  (1) Strengthen organizational leadership. Relevant departments in all regions should improve the innovative working mechanism of large, medium and small enterprises, formulate and improve the work plan for implementation in this region, draw the industrial chain map, establish the key enterprise library, the project library for chain-mending and chain-strengthening and the demand list, improve the expert consultation mechanism, strengthen the linkage among ministries, provinces, cities and counties, refine and decompose work tasks, and strengthen coordination and scheduling to ensure the implementation of all work. (Responsible for all relevant departments)

  (2) Strengthen policy support. Finance at all levels can actively support the financing and innovation of large, medium and small enterprises through existing channels according to the development needs. Promote state-owned enterprises to formulate incentive measures to open up innovative resources to small and medium-sized enterprises, give total wages support to relevant teams that have achieved remarkable results in promoting the integration and innovation of large, medium and small enterprises, give extra points to state-owned enterprises that have made great achievements in the annual assessment, and give incentives in the term assessment. Encourage local governments to explore and implement innovative financing projects for large, medium and small enterprises. (Responsible for all relevant departments)

  (3) Strengthen publicity and guidance. Summarize the experience and practice of promoting the innovation of large, medium and small enterprises, publicize and promote the typical experience model, and improve the level of promoting the innovation of financing. Innovate propaganda methods, further promote the deepening of innovative ideas, unite social consensus, and create a good atmosphere to jointly promote the integration and innovation of large, medium and small enterprises, and strengthen the chain of industrial chain and supply chain. (Responsible for all relevant departments)

Ministry of Industry and Information Technology

National Development and Reform Commission (NDRC)

Ministry of Science and Technology

the Ministry of Finance

Ministry of Human Resources and Social Security

People’s Bank of China

State-owned Assets Supervision and Administration Commission of the State Council (SASAC)

State Administration for Market Regulation

China Banking and Insurance Regulatory Commission

China National Intellectual Property Administration

the all chinafederation of industry and commerce

May 12, 2022

23 Dodge Challengers 3.6LV6 The lowest price of 400,000 muscular men in the car.

As an American muscle model, 23 Dodge Challengers need to be sloppy and rough to be more American. There is such a car, when you first see it, your heart is a little throbbing, and at the same time, you are more appreciative. Most friends who have feelings for the American muscle car will love it, even regard it as a treasure, and it is the Dodge Challenger.

Sales Manager: 13034318716 Manager Ju WeChat Synchronization

Black Yao Bao (black wheel, black taillight ring, black fuel tank cover, black grille, black small tail wing, leather performance steering wheel)

Sales Manager: 13034318716 Manager Ju WeChat Synchronization

I believe that most people get to know each other in the movies of Speed and Passion, especially when Van Dissel drives it through the streets. As one of his cars in the movie, Dodge’s sense of power must have left a lingering impression in your mind, and the more cool gold will return to the king in the 2023 model. Sales Manager: 13034318716 Manager Ju WeChat Synchronization

23 Dodge Challengers will get a 3.6-liter Pentastar V-6 engine, which will be used in the transmission of SXT and SXT P. Dodge provides the new car with an eight-speed automatic transmission. In terms of suspension, keeping the side up is an independent suspension with a five-bar linkage at the back. In order to help reduce the image of a straight-line hero, Challenger also provides various performance suspension and braking components with excellent functions, including Bilstein impact, lower driving height and new steering adjustment. Sales Manager: 13034318716 Manager Ju WeChat Synchronization

In addition, it also comes standard with electric power steering and offers the option of adaptive damping system. Although both the exterior interior and the dynamic performance are very exciting, with the development of parallel imports in China, Dodge Challenger has also entered the eyes of the people from the movies, and more and more car lovers have entered the car club of this car, and more people will own this car, which will become a beautiful landscape in the streets and alleys all over the country in the future! However, it is equipped with a 3.6L V6 engine. In appearance, it has 20-inch wheels, LED light sources and other configurations. The appearance is more scientific and sporty, and it is more attractive with retro design. Sales Manager: 13034318716 Manager Ju WeChat Synchronization

Sales Manager: 13034318716 Manager Ju WeChat Synchronization

Jiangsu Provincial Department of Transportation Portal Notice Announcement ETC Sutong Card FAQ

I. Policy interpretation

1. Why do you want to cancel the provincial toll station of expressway?

With the rapid development of China’s economy and society, the flow of people and materials is becoming more and more frequent, and the inter-provincial driving of vehicles has greatly increased, and the phenomenon of queuing for payment at some provincial toll stations has become increasingly prominent.

On March 5, 2019, Li Keqiang, Premier of the State Council of the People’s Republic of China made a government work report at the Second Session of the 13th National People’s Congress, and emphasized that the provincial toll stations of national expressways will be basically cancelled within two years, so as to realize fast toll collection without stopping, reduce congestion and facilitate the masses. Cancel the provincial toll station of expressway.

2. Why does the country strongly recommend car owners to install ETC recently? What will happen if you don’t apply for ETC in the future?

Vigorously promoting the use of ETC is a measure to implement the decision of the CPC Central Committee and the State Council on deepening the reform of toll road system and canceling the provincial toll stations of expressways, so as to realize fast toll collection without stopping and reduce congestion. After the provincial toll station of expressway is cancelled, only one artificial lane is reserved at the entrance and exit of each toll station for handling special vehicles. Since January 1st, 2020, all kinds of preferential policies, such as toll reduction and exemption, have been realized by ETC system, unless otherwise stipulated by the State Council.

In the future, if ETC is not handled, users can only queue up for payment, which will not only make it impossible to pass efficiently and quickly, but also won’t enjoy all kinds of preferential tolls.

3. Can it be used nationwide after handling ETC?

ETC has been connected to the whole country. Except Hongkong, Macau, Taiwan Province, Tibet and Hainan, ETC users can pass through expressways in other 29 provincial administrative regions.

4. How much discount does the national ETC pass enjoy?

Users can enjoy a 15% discount on ETC in the national expressway.

Second, ETC introduction

1. what is ETC?

ETC, also known as the electronic toll collection system for expressway, is an electronic automatic toll collection system for highways, bridges and tunnels that is being popularized internationally. Through the communication between "on-board electronic tag +IC card" and microwave equipment in ETC lane, a fully automatic toll collection system with the function of paying highway tolls without stopping is realized.

2. What does the ETC lane on the expressway mean?

ETC lane, also known as ETC toll platform, refers to China’s expressway networking toll collection system, where vehicles pay tolls automatically without stopping at road and bridge toll stations, thus realizing convenient non-cash payment of expressway tolls.

3. What are the benefits of installing ETC?

There are four major benefits:

Time-saving: "seconds" does not stop at high speed, and it takes only 2 seconds for the vehicle to pass through the ETC lane with one foot on the accelerator.

Fuel saving: non-stop traffic reduces idle fuel consumption, and every 10,000 ETC transactions will save 314 liters of fuel consumption.

Save money: the national high-speed toll is not less than 15% discount, and differentiated charges will be supported in the future.

Environmental protection: low-carbon transportation, green travel, and every 10,000 ETC transactions will reduce the emission of various pollutants by 55.96 kilograms.

4. How is 4.ETC deducted? Is there a risk of stealing when users use ETC?

Deduct fees from third-party payment accounts such as bank cards bound by ETC charge-to-account cards.

At present, ETC card and user’s bank card adopt two-card separation mode, so there is no risk of stealing.

5. When passing through the ETC lane, under what circumstances is the ETC transaction successful?

After the automatic charging is successful, your current license plate information, charging amount and balance will be displayed on the fee display screen. When you see your license plate information on the fee display screen and the railing is raised, it means you can pass, otherwise please wait for the system to process it. The charge display screen will only switch to the charge information of the next car after the previous car has completely driven out, so please avoid being too close to the car during use to prevent accidents.

6. How many seconds does it take to pass through the toll booth after installing ETC?

Within 10 seconds, the speed of ETC lane is equivalent to about 5 times that of manual toll lane.

7. Can 7.ETC only be used on expressways?

With the gradual progress of canceling toll stations at provincial boundaries of expressways, the system and application scenarios of ETC will be more enriched and expanded. At present, the application has been gradually extended to airports, hospitals, shopping malls and parking lots in residential areas.

8. What is the telephone number of Jiangsu ETC’s supervision service?

025—96777

Third, ETC processing

1. What items are free for ETC?

Now it is free of charge, that is, "three exemptions": free of ETC card fees, free of OBU equipment fees and free of installation fees.

2. What is the location and method of installation?

Car owners can go to 63 ETC self-operated outlets, high-speed service areas and bank outlets in the province to handle ETC on site. You can also pay attention to "ETC Assistant" WeChat official account, "Tongbao ETC" WeChat official account, "Sutong Card" applet and the online application of commercial banks. Institutions, enterprises, towns (streets) can also make an appointment to carry out on-site service.

3. Which banks can handle ETC business at present?

Sixteen banks, including Industrial and Commercial Bank, Agricultural Bank, China Bank, China Construction Bank, Bank of Communications, Postal Savings Bank, China Merchants Bank, Industrial Bank, Shanghai Pudong Development Bank, Huaxia Bank, Jiangsu Bank, hengfeng bank, China CITIC Bank, Bank of Ningbo, China Everbright Bank and Provincial Rural Credit Cooperatives, can handle it.

4. What models are supported by 4.ETC online processing?

Individual non-operating buses with less than 7 seats (including 7 seats) (vehicle types include "bus", "van" and "off-road vehicle"), and the vehicle type shall be subject to the approval of motor vehicle driving license.

5. Can personal ETC equipment be lent to other vehicles?

No, ETC implements the "one car, one card" system, that is, one car can only be bound to one ETC.

6. How long will it take for the user to confirm the logistics information if he applies for ETC? How soon will it get to us?

After applying for ETC, the distribution service agencies in our province will mail the equipment and cards to you as soon as possible. For the express mail information, you can contact the application distribution service provinces, and the customer service phone number of all distribution service agencies can be queried by clicking "Customer Service" on the homepage of Sutong Card applet.

7. When bidding for ETC, it is indicated that the license plate has been processed for ETC. What is the matter?

A: There are two situations:

 For example, WeChat co-branded cards, Alipay co-branded cards, bank co-branded cards, third-party issuers or ETC cards that have been processed in other provinces, users need to cancel the processed ETC cards before re-processing;

The license plate is a reheating license plate. Although it is a new license plate received at the vehicle management office, the previous owner has already applied for an ETC card. According to the principle of "one car, one card and one label", the new owner cannot apply for it again. The new owner needs to provide the original vehicle driving license and owner ID card, and the Jiangsu issuer contacts the original owner to assist the cancellation of the license plate.

8. The owner installs ETC equipment by himself. How to judge that the OBU equipment has been activated successfully?

After successful installation and activation, unplug the card, wait for one minute to disconnect Bluetooth, and then insert the card again to have a look. After hearing the beep, when the screen of the electronic tag shows "Charge Card" or "Amount", it has been activated successfully without showing that it has been disassembled. If the words such as invalid electronic tag and no card inserted are displayed, it means that your electronic tag is abnormal and needs to be reactivated and installed at the business outlets.

Fourth, after-sales service

1. How long is the validity period of the 1.ETC card?

At present, the validity period of ETC equipment is basically 10 years. During the validity period, as long as the equipment is normal and the card has money, it can be used all the time, and it can be extended to continue using when it expires. Devices that use credit cards to deduct fees should pay attention to the validity period of credit cards. If the credit cards have expired, the deduction will fail, but the ETC system itself is still effective.

2. Is there a warranty period for 2.ETC equipment?

ETC has the same warranty period as general commodities, which is generally two years. If the equipment or stored-value card is not artificially damaged within two years from the date of installation, you can enjoy the warranty service, and you can directly replace the new equipment for free at the service outlets.

3. Do 3.ETC devices need to be charged?

There are two devices for installing ETC: OBU and tag. OBU is a solar panel, which will automatically charge when there is a certain light, so there is no need to charge it specially.

4. what if 4.ETC can’t be used normally?

When passing through the ETC toll lane, if the electronic tag can’t be used normally, it needs to be transferred to the manual lane to swipe the card, and then go to the relevant outlets for consultation. If the vehicle has already entered the ETC lane and there are many cars waiting in line behind, please ask the toll booth staff for help immediately.

5. How to issue ETC pass invoices?

Car owners can issue toll VAT electronic ordinary invoices through the national unified invoice service platform. On the website of the invoice service platform, www.txffp.com or download the "ticket stub network" APP, and log in to the registered account to bind the card number for invoice issuance. Ticket stub customer service telephone number: 95022.

6. Can I unplug the 6.ETC card when it is not in use?

You can pull it out. Just plug it in before going through the ETC dedicated channel. Note when using: ETC is in the form of binding the vehicle with ETC card and OBU, which is dedicated to the special vehicle, that is, one car, one card and one tag, and the information in the card must be consistent with the electronic tag and vehicle information. Ensure that the balance of ETC card or associated bank card is sufficient. Plug in the ETC card, and the OBU green indicator will flash to use.

7. The online channel applies for ETC equipment, but it cannot be activated after receiving it. What should I do?

Answer: Please follow the operating instructions and choose the correct channel for installation and activation. If the ETC card or Bluetooth electronic tag fails to activate, you need to send the ETC card and Bluetooth electronic tag back to the after-sales, and someone will test and replace the new equipment for you.

Note: You can view the detailed activation tutorial by replying to the keyword [Online Activation] [Installation Video] in the background of Tongbao ETC WeChat WeChat official account!

In 2023, the special exhibition on environment, health and telecommunications services of the Trade Fair will be full of highlights, and a number of new products and technologies will be unveiled coll

  Original title: 2023 Special Exhibition on Environment, Health and Hygiene, and Telecommunications Services of the Trade Fair, with many highlights, a number of new products and technologies will be unveiled collectively.

  The 2023 Service Trade Fair will be held in Beijing from September 2 to 6. During the exhibition, the latest products and technological achievements in the field of service trade will be unveiled, and the audience can not only experience green and low-carbon life, feel the culture of Chinese medicine, but also explore the meta-cosmic world. With the help of the platform of the Service Trade Fair, exhibitors will deepen cooperation in various fields and promote the high-quality development of service trade.

  New products and technologies show the achievements of low-carbon transformation

  In 2023, a number of new products, new processes and new technologies will be unveiled in the Special Exhibition on Environmental Services of the Trade Fair, showing China’s experience in promoting green and low-carbon transformation.

  In the exhibition area, visitors will have the opportunity to experience the first L4-class self-driving freight car in China. This model is specially designed for urban open roads, equipped with Wen Yuan Zhixing full-stack software and hardware autopilot solution, and has 360-degree blind spot perception ability, which brings new kinetic energy to smart freight.

  The audience can also get a close look at China’s first terrestrial ecosystem carbon monitoring satellite "Ju Mang", which is developed by China Aerospace Science and Technology Corporation. Through comprehensive remote sensing means such as laser, hyperspectral and polarization, the carbon monitoring and carbon storage statistics of terrestrial ecosystems can be realized, providing all-round data support for "promoting dual control of energy consumption to dual control of carbon emissions".

  Also unveiled on the same stage is the topological soft gel "Kuku" light and warm temperature-regulating material newly developed by Zhongke Haishi, which has ultra-low thermal conductivity, ultra-softness, lightness and windproof and warmth-keeping, endowing fabric aerospace materials with temperature regulation and memory functions, and realizing that an ultra-thin coat can resist the winter cold.

  In 2023, the International Green Economy Association will bring the "carbon-neutral green technology" exhibition group to the stage of the service trade fair again, and the first national technology innovation center in the field of "double carbon" in China will make its debut at the environmental service special exhibition. In addition, the Service Trade Fair will build a platform for cooperation and exchange, and carry out a series of meetings, forums, promotion and negotiation activities around hot topics such as "carbon neutrality in peak carbon dioxide emissions", development of dual-carbon enabling industries, carbon trading, and green cities.

  Well-known medical and pharmaceutical enterprises organized a delegation to participate in the exhibition

  Medical service is an important part of service trade. In 2023, the theme of health and health services of the Service Trade Fair focused on science and technology and innovation, focusing on high-quality development achievements in health and health services such as public health services, biomedical innovation, digital medical care, intelligent health care and traditional Chinese medicine. Many well-known medical and pharmaceutical enterprises and service institutions at home and abroad actively participated in the exhibition. Up to now, the offline exhibition rate of this special exhibition has reached 100%, with 108 offline exhibitors and institutions, accounting for 36% of the world’s top 500 and leading enterprises in the industry, and the internationalization rate has exceeded 30%.

  The special exhibition of health and hygiene services covers an area of 7,700 square meters, and consists of three major exhibition areas: the core public welfare exhibition area, the high-tech enterprise exhibition area and the traditional Chinese medicine exhibition area. Among them, the core public welfare exhibition area will bring together 20 well-known public medical and health institutions at home and abroad, focusing on the high-quality development achievements in China’s medical and health fields, and presenting innovative capabilities and new achievements in high-quality development in the health and health fields from multiple angles and in all directions.

  Traditional Chinese medicine exhibition area is divided into indoor exhibition and outdoor exhibition, so that the audience can immerse themselves in Chinese medicine culture. Jiuzhitang will display Jiuzhitang -ALTACO International Medical Center established on the border of Horgos, China and Kazakhstan, as well as Chinese medicine products exported to Brazil; Chunfeng Pharmaceutical will demonstrate the advantages of innovative transformation projects of traditional Chinese medicine; The representative institutions of Tibetan medicine, Zhuang medicine, Manchu medicine and Yao medicine will display their traditional excellent techniques and products at the service trade fair. There is also a live broadcast room of "Herbal Living Room" on site, which can directly reach the global consumer groups in the form of interviews, popular science, shop exploration and online interaction.

  The special exhibition area will also set up dozens of distinctive and colorful supporting activities. Among them, the "Second Beijing International Consumption Festival of Traditional Chinese Medicine" focuses on the hometown of famous Chinese medicine doctors, the homology of food and medicine, health care and traditional Chinese medicine, creating a live experience of "one step at a time, one step at a time" and promoting the expansion of the Chinese medicine consumption market.

  Five core telecom enterprises gathered at the service trade fair for the first time.

  When digital technology is integrated into new life, smart life shines from concept into reality. This year’s special exhibition on telecommunications, computer and information services of the Trade Fair has two theme pavilions, namely, communication and digital technology and metauniverse application, and four special zones, namely, telecommunications service, digital technology, smart life and characteristic exhibition area, to fully display the cutting-edge technologies and development achievements in the fields of information communication and metauniverse.

  This special exhibition will bring together five core telecom enterprises, namely China Telecom, China Mobile, China Unicom, China Radio and Television, and China Tower, for the first time, to comprehensively show the development status of China’s information and communication industry, and lead the audience to appreciate the future intelligent life scenarios empowered by technologies such as 5G, Internet of Things, cloud computing and big data through virtual reality technology, holographic projection and interactive screen. China Radio and Television Group will participate in the Service Trade Fair for the first time in 2023.

  At the same time, the Meta-Universe Frontier Technology Experience Center will add a safety education theme area on the basis of the innovation release area, digital art area and game experience area, and will also introduce the national strategic scientific and technological strength and the world’s leading broadcast control technology to fully display the industrial ecology in the information and communication field.

  During the exhibition, the topic will hold more than 10 related conferences and forums, focusing on cutting-edge topics such as high-quality development of specialized and special new enterprises, digital technology, artificial intelligence manufacturing and power system technology. (Ma Wei Sun Leqi Xia Wei)

Kunming xingyue l zhiqing price reduction information! The latest offer is 152,700 yuan, with a limited time special offer.

[car home Kunming Preferential Promotion Channel] Recently, good news keeps coming, and consumers in Kunming now have the opportunity to enjoy special discounts on models. As a high-profile new energy vehicle, Xingyue L Zhiqing is carrying out a price reduction promotion in Kunming market. The maximum preferential amount has reached an astonishing 7,000 yuan, further reducing the competitive starting price, and the minimum starting price has been adjusted to 152,700 yuan. If you are interested in this car, you must seize this rare opportunity and click "Check the car price" in the quotation form to get a more affordable price and a better car buying experience. Don’t miss this good opportunity to save money for your car purchase plan!

昆明星越L智擎降价信息!最新报价15.27万,限时特惠

The design of Xingyue L Zhiqing shows the perfect combination of exquisiteness and strength of Geely brand. In the front part, it adopts the family-style design language, and the iconic air intake grille is decorated with a large area of chrome plating, which complements the sharp LED headlights and creates a strong visual impact. The overall style is stable and smooth, showing the dual charm of high-end business and sports performance. On the side of the car body, the combination of slender car body proportion and dynamic waistline highlights the sense of output and modernity, which is impressive. No matter from which point of view, Xingyue L Zhiqing shows a unique design aesthetics.

昆明星越L智擎降价信息!最新报价15.27万,限时特惠

The car series Xingyue L Zhiqing outlines a unique side profile with elegant and smooth body lines. Its body size is 4795mm x 1895mm x 1689mm, and the wheelbase is as long as 2845mm, ensuring a spacious and comfortable interior space. The front and rear wheel tracks are both 1610mm, which provides good stability and handling for the vehicle. The exquisite tyre size is 235/50 R19, with dynamic rim design, which not only enhances the visual impact when driving, but also ensures the grip and comfort during driving.

昆明星越L智擎降价信息!最新报价15.27万,限时特惠

The interior design of Xingyue L Zhiqing is elegant and pays attention to details, showing the perfect integration of luxury and technology. The exquisite leather steering wheel not only feels comfortable, but also supports manual up and down+front and rear adjustment to meet the needs of different drivers. The 12.3-inch central control screen is clear and easy to operate, integrating multimedia system, navigation, telephone, air conditioning and skylight control to provide drivers with a comprehensive infotainment experience.

The seat is made of imitation leather, and the cushion is wide and supports 4 forward and backward adjustments, backrest adjustment, height adjustment and lumbar support to ensure the comfort of the driver for a long time. The driver’s seat also has heating and ventilation functions, and the co-pilot seat also has backrest adjustment to enhance the riding experience. In addition, Xingyue L Zhiqing is also equipped with electric seat memory function to provide personalized settings for drivers. The second row of seats supports backrest adjustment, and the rear seats can realize flexible use of space through proportional reclining function. The overall interior design not only pays attention to practicality, but also gives consideration to luxury, creating a pleasant interior environment for passengers.

昆明星越L智擎降价信息!最新报价15.27万,限时特惠

Xingyue L Zhiqing is equipped with a 1.5T turbocharged engine with a maximum power of 120kW and a torque output of 255nm, which can provide excellent performance. This engine is matched with the 3-speed DHT transmission, which not only ensures the driving flexibility of the vehicle, but also pays attention to fuel economy and driving comfort.

Summarizing the evaluation of Zhou Ma’s family, the intelligent engine version of Xingyue L undoubtedly won her appreciation in appearance design. The bright white body color shows a unique clean temperament, while the high-end atmospheric body lines and front face design convey extraordinary taste. The owner mentioned that the headlight and taillight design of Xingyue L is a bright spot, which is comparable to BBA-level luxury. Undoubtedly, the design of Xingyue L not only meets her aesthetic needs, but also becomes a confident choice for her daily travel.

Follow the general secretary to see China | Draw a picture of "the city of happiness" with the concept of "the city of people"

  "Go, go to the canteen!" At mealtime, Duan Feng greeted several old partners and walked into the community canteen.

  "There are many people here every day. Sometimes if you don’t want to cook at home, you will come and buy some. Old people like us still enjoy discounts." Duan Feng, 70, is a migrant from Nanwenying Community in Rongdong District, xiong’an new area. Since the opening of the community canteen, he has also become an "old customer".

  “红烧鲫鱼、肉片豆腐、西红柿炒鸡蛋、清炒菜花,4小份菜外加4个馒头,算上七五折的优惠,我们付14块钱就行。”一边说着,段峰一边把餐盘放到了桌子上,“这儿做的花样多,口味也不赖,挺好!”

MAIN202305102350000251989095730

  5月10日,中共中央总书记、国家主席、中央军委主席最高领袖在河北省雄安新区考察,并主持召开高标准高质量推进雄安新区建设座谈会。这是10日上午,最高领袖在容东片区南文营社区食堂同就餐的社区老人亲切交流。 新华社记者 李学仁摄

  2023年5月10日,最高领袖总书记赴河北雄安新区容东片区南文营社区考察。他先后来到社区党群服务中心和社区食堂,同社区工作人员、现场办事群众、就餐的社区老人等亲切交流,仔细查看民情台账,对社区开展的便民养老服务等表示肯定。

  最高领袖强调,我一直牵挂着回迁群众,看到大家生活好,我很欣慰。建设好雄安新区,重要的是衔接好安居和乐业,让群众住得稳、过得安、有奔头。要同步推进城市治理现代化,从一开始就下好“绣花”功夫,积极推进基本公共服务均等化,构筑新时代宜业宜居的“人民之城”。

  Care about the old age and care about food, clothing, housing and transportation. Before leaving Nanwenying Community in Rongdong District, the Supreme Leader said to the gathered people with deep affection: "I have worked in Hebei and have a nostalgia for Hebei. I am very happy to see that the people here have a good life! "

  For the people, rely on the people and benefit the people. The "Xiong ‘an Chapter" of Chinese-style modernization focuses on the people and explores a new path to build a modern city with new development concepts. Over the past six years since the establishment of xiong’an new area, the background color of the people depicted in this "city of the future" has become increasingly rich.

  Stay stable: a happy life is within reach.

  More than 5,000 people from Anxin and Rongcheng counties have been resettled in Nanwenying Community in Rongdong District, xiong’an new area. There are 8 communities including Suntech Garden, Lixian Garden and Juxian Garden.

  Duan Feng’s family was originally a villager in Hu Village, Dahe Town, Rongcheng County. At the end of 2021, they moved back to Rongdong District and lived with their wife in a 100-square-meter three-bedroom apartment.

  "The houses are all hardcover, and the elevators go up and down the stairs. At that time, the bags were directly checked in, and even the electric water heaters were installed for us. Now I live in a spacious and bright house every day. Compared with the original life, the days are more beautiful! " Duan Feng said.

  Talking about the feeling of living in a new home, Duan Feng happily introduced: "Every day, you can go to the community pension station to play cards. When the weather is fine, you can go out and walk around, and the community often organizes some activities to respect the elderly. My wife and I can get a pension every month, and we don’t have to worry about spending enough money and living. The children are also filial and the days are very happy. "

Pension station 1_ copy _ copy

  Old people who come to practice dancing in Nanwen Community Pension Station. People’s Daily reporter Li Xueqing photo

  Nanwen Community Pension Station, with a total area of 886 square meters, mainly serves nearly 3,000 elderly people in Nanwenying and Nanwen communities. It is equipped with free activity spaces such as painting and calligraphy room, activity room, multi-function hall, health cabin and lounge, where services such as cultural entertainment, psychological comfort and health guidance are provided for the elderly to meet the diversified needs of different elderly people and open up the "last mile" of pension services, so that the elderly can enjoy a happy old age.

  Here, the reporter saw Hou Dongqi, a migrant who was leading a dozen old people to sing. "When I used to live in the village, there weren’t so many entertainment items, but now I can’t pick them, such as singing, calligraphy, table tennis, clapping and dancing, and fan dancing … … Everyone can be happy! " Hou Dongqi said.

  Wang Weixiao, secretary of the Party branch of Nanwenying Community, said that the community party-mass service center can provide 45 government services and convenience services for residents, and through the joint construction of party building, it has built a number of neighborhood-level public service facilities such as community canteens, community museums, neighborhood stations, pension stations, sports activity rooms, and red e-commerce business incubation bases. Together with kindergartens, health service stations, and convenience business points, it has built a number of neighborhood-level public service facilities with perfect service functions, diversified service subjects, higher service quality and higher service efficiency.

Wechat Picture _20230829105008_ Copy

  Residents eat in the community canteen. People’s Daily reporter Li Xueqing photo

  Nanwenying Community Dining Hall officially opened on February 1st this year, adopting the operation mode of "marketization+public welfare", opening to community residents and tourists, and offering exclusive discounts for the elderly: 60.70-year-olds can enjoy a 25% discount, 7180-year-olds can enjoy a 50% discount, and 81-year-olds and above can enjoy a 25% discount. The elderly have completed the real-name authentication and can eat when they brush their faces in the canteen. At present, Nanwenying Community has carried out real-name authentication for more than 1,000 elderly people.

  "In fact, we are still in the exploratory stage of the community canteen project, but we feel very worthwhile to see the happy smiles of the old people when they come to the canteen to eat, and we will continue to make this project bigger and stronger." Chen Churong, deputy stationmaster of the convenience service station of Nanwenying Community Party Group Service Center, said, "We will also provide food delivery services for special elderly groups such as the elderly, living alone and empty nests in conjunction with the community volunteer service team to further meet the personalized, diversified and popular home care service needs of the elderly in the jurisdiction."

  Live a safe life: "one call and one response" to promote the modernization of urban governance

  There are "aborigines" in xiong’an new area who turn farmers into citizens, as well as builders, relocated people and entrepreneurs. The General Secretary of the Supreme Leader clearly pointed out: "We are not building a beautiful new city, but just building a new city for the people to live a better life."

  Governing the city, under the "embroidery" effort. "It is necessary to promptly perceive the worries, worries and worries of community residents and solve them one by one." General Secretary of the Supreme Leader explained the "greatest achievement" of "benefiting the people" in this way.

Wechat Picture _20230829102920_ Copy

  Aerial photography of Rongdong area in xiong’an new area. People’s Daily Online Zhaomin Li photo

  "At the beginning of the relocation of the relocated people, the Rongdong area faced problems such as the relocated people not adapting to urban life and the poor coordination and linkage of various construction and operation entities." Yang Shuo, director of the Community Construction Division of Rongdong Management Committee, said that responding to people’s demands in time and solving people’s urgent difficulties and worries have become the top priority of all work.

  To this end, Rongdong Management Committee actively explored a new model of community governance, launched a "one call and one response" working mechanism under the guidance of party building, and relied on "community — Community — The three-level grid of "Loumen", active service and all-round arrangement, forms two accounts and three lists, and builds a grassroots governance system with multi-channel appeal expression, multi-agent participation and multi-department linkage.

  “‘ One-call response ’ The working mechanism was first implemented in Nanwenying Community in Rongdong District, and 292 residents’ needs and demands were coordinated and solved, so that small things did not leave the community and major events did not leave the area. " Wang Weixiao said, "The general party branch of Nanwenying Community consists of 8 temporary grid party branches, 1 temporary community property party branch, 1 temporary community canteen party branch and 25 loumen party groups, forming a party building pattern of linkage from top to bottom and co-construction."

  At the same time, combined with the actual situation, Nanwenying Community, district construction units and resident units jointly carry out activities such as theme education and volunteer service to realize information exchange and resource sharing and jointly solve the needs and demands of the masses.

  In August last year, some people in Nanwenying community reported that the construction of the gas station project on the east side of their residential area caused noise to disturb the people, and there were security risks. Some people also showed excitement during the exchange of WeChat groups. Community cadres immediately contacted the district construction unit to coordinate the construction unit to stop construction at night, and directly contacted the planning department to understand the standardization of gas station site selection, and organized the floor chief and residents’ representatives to hold a residents’ forum and make policy explanations..At this point, the residents untied their hearts and the "contradictions" were successfully resolved.

  Under the guidance of the community, the residents’ sense of ownership in participating in community governance is gradually awakened. At present, Nanwenying Community has set up seven volunteer service teams, including "Firefly" and "Red women soldiers", which have played an active role in policy theory propaganda, human settlement environment improvement, contradiction and dispute mediation, and security risks investigation.

  In 2023, Rongdong District has held several joint meetings on community governance. Up to now, 373 issues such as mass disputes, house maintenance, structural transformation, community environmental sanitation, public facilities maintenance and electric vehicle charging and parking have been solved.

  Have a head start: a stable employment "rice bowl" at home.

  The General Secretary of the Supreme Leader stressed that it is necessary to give priority to employment, improve the guiding policies for employment and entrepreneurship, and strengthen the re-employment training for the labor force in the new district.

  In Nanwenying Community Party and Mass Service Center, there is a "people’s sentiment account". Although the account book is small, it records the major events, minor events and trivial matters of community residents.

  "Hello, do you have any unemployed college students at home who need employment registration service?" At 9 o’clock in the morning, Chen Churong began a day-long home visit to find out the situation of unemployed college graduates in the community and registered them in the "People’s Account".

Wechat Picture _20230828175543_ Copy _ Copy

  Nanwenying community "people’s sentiment account". People’s Daily reporter Li Xueqing photo

  "We will regularly check the situation of fresh graduates and unemployed college students in the community. According to the job information provided by Rongdong Employment Service Center, we will accurately push them every two weeks, and everyone will push them at least three times." Chen Churong introduced that in addition to employment assistance for college students, the community has also set up odd jobs stations to summarize the information of nearby enterprises and post them on the bulletin board of the community to provide more intuitive information for community residents to apply for jobs and take part-time jobs.

  "Does our fast food restaurant still recruit people?" "What are the specific requirements for the post?" … … In Nanwenying community odd jobs station, staff often receive consultation calls from the masses.

  Flexible employment is an important channel to increase people’s employment and income. Compared with the traditional fixed working mode, odd jobs are more flexible and independent, and "odd jobs" play an important role in promoting the employment and income of older and difficult people. Since the establishment of odd jobs post, fewer and fewer residents are unemployed at home, and more and more residents are employed at home.

8N8A0065_ Drug tyrants see pictures _ copy _ copy

  Near the meal, Jing Dongying is serving dishes in the community canteen. People’s Daily reporter Li Xueqing photo

  Jing Dongying, 45, found a job as a "cook" in the canteen through the community. "8 hours a day, walk to and from work for 5 minutes, and pay monthly." Jing Dongying said.

  In order to ensure the high-quality and full employment of the relocated residents, xiong’an new area Rongdong Management Committee has established a "1+N" employment service system, set up Rongdong Employment Service Center and odd jobs post station, built a docking platform between supply and demand, and fully tapped jobs. Through special activities such as large-scale visits and policies to find people to serve at home, we can learn more about the employment status, skills, employment intentions and training needs of each household, record the "public sentiment account" in detail and upload the data to the smart community platform.

  In addition, Nanwenying Community also relies on the red e-commerce business incubation base in Rongdong District to train the relocated people for free. Combine the original local traditional industries such as clothing, plush toys, furniture and bags, develop new formats such as e-commerce sales, and encourage young people in the community to increase their income and get rich through live broadcast. The community red e-commerce business incubator base has carried out 14 training courses such as "network entrepreneurship training course" and "beautician and makeup artist", training 448 students and helping 294 people to find jobs.

  Since the beginning of this year, xiong’an new area has organized more than 80 recruitment activities of various types, providing more than 70,000 jobs for college graduates, migrants and rural laborers.

  Xiong’an new area has entered the stage of paying equal attention to large-scale construction and undertaking Beijing’s non-capital function relief, and the focus of its work has shifted to high-quality construction, high-level management and high-quality relief development.

  The hoof moves forward steadily, and the "city of the future" is growing day by day. Xiong’an new area’s construction is a Millennium project, and it will take a long time to make achievements. We can neither be impetuous nor wait for the important, but we must work hard and diligently. On the new journey, we must strengthen our confidence, maintain our determination, be steady and steady, do good deeds, adhere to a blueprint to the end, and work one after another, truly turn a high-standard urban planning blueprint into a high-quality realistic picture of urban development, and constantly write a new chapter in high-quality development.

Honda recreational motorcycle CB400X comes, selling 41,500 yuan, which is a comfortable, stable and fuel-efficient weapon for Tibet.

For bikers who love riding and seek adventure, choosing a suitable motorcycle is like choosing a trustworthy partner. Today, I would like to recommend a Honda leisure adventure motorcycle-CB 400X to all motorcycle friends. With its unique charm, this model has been enthusiastically sought after by cycling enthusiasts once it was listed.


First of all, let’s start with the design of CB400X. It adopts Honda’s family design language, and its overall shape is quite similar to that of the family model CB500X, but the details have been carefully fine-tuned, making the overall appearance richer and more harmonious. The body lines are smooth and muscular, giving off a strong off-road atmosphere. In the front part, the large-area windshield design is eye-catching, which not only has two-stage manual adjustment function to adapt to different wind resistance and road conditions, but also visually enhances the domineering feeling of the whole vehicle.

In terms of power performance, CB400X is equipped with a water-cooled four-stroke four-valve inline twin-cylinder engine with an actual displacement of 399CC. This engine has been carefully adjusted by Honda engineers, matched with 6-speed transmission, and equipped with a sliding clutch, which makes the power output of the whole vehicle smoother and more abundant. The maximum power reaches 44.9 horsepower and the maximum torque is 37 Nm, which is enough to make CB400X perform well in all kinds of road conditions. Whether it is commuting in the city or long-distance exploration, it can easily cope with it, bringing endless driving pleasure to cyclists.


In terms of comfort, CB400X also performed well. The design with a seat height of 807 mm allows riders of different heights to find their own riding posture. The fuel tank has a volume of 16.5 liters and a curb weight of 195 kilograms. This configuration ensures the endurance of the vehicle during long-distance riding. According to official data, the fuel consumption per 100 kilometers of CB400X is only 3.6 liters, and the cruising range can reach 450 kilometers. This fuel economy is among the best in its class. In addition, the top speed can reach 157 kilometers per hour, allowing riders to enjoy the pleasure brought by speed under the premise of safety.


In the aspect of suspension system, CB400X adopts the front 41mm sporty golden inverted hydraulic front fork and the rear middle single gun multi-link spring for shock absorption, which makes the whole vehicle more stable and comfortable during driving. At the same time, the design with adjustable preload allows riders to make personalized adjustments according to their own needs. In terms of braking system, CB400X is equipped with front and rear disc brakes and dual-channel ABS braking system, which ensures the safety and stability in emergency braking.



In addition to these hardware configurations, CB400X has also done a good job in intelligence. It is equipped with multifunctional LCD negative display LCD screen instrument, which has rich function display and reasonable layout, so that riders can know the vehicle status and driving information at any time. In addition, it also supports Bluetooth connection, mobile navigation and other functions, providing riders with a more convenient and intelligent riding experience.

In terms of price, the official price of Honda CB400X is 41,500 yuan, and the price of the motorcycle version is 47,500 yuan. Although the price is relatively high, considering its excellent performance, rich configuration and good reputation of Honda brand, this price is definitely worth the money.

Generally speaking, Honda CB400X is a motorcycle with adventure, leisure and intelligence. It has excellent power performance, fuel economy and rich configuration, which can be easily handled whether it is commuting in the city or long-distance exploration. If you are a motorcycle friend who loves riding and seeks adventure, then CB400X is definitely the best choice for you. Let’s ride it together to conquer the unknown distance!


Smart World R7 will be available on September 24

A few days ago, we learned that the intelligent world R7 will be listed on September 24th. The new car has been pre-sold before, and the pre-sale 268,000. The new car is based on the development of the Tuling chassis platform, using the suspension combination of the front virtual kingpin double fork arm + the rear five links. The whole system is equipped with CDC variable damping shock absorber and air suspension as standard, and is equipped with intelligent road condition recognition system.

 The Smart World R7 adopts a design similar to the Smart World S7 as a whole. The closed front grille is combined with the tear-eyed headlights on both sides to create a good recognition. In terms of body color scheme, in addition to the classic ceramic white, deep space gray, gilt black and metropolitan red color scheme, there are also two new colors of Phantom Purple and Clear Blue, a total of 6 colors to choose from.

LUXEED Smart World, Smart World R7 2024 Max

LUXEED Smart World, Smart World R7 2024 Max

  In terms of body size, the length, width and height of the new car are 4956 × 1981 × 1634mm, and the wheelbase is 2950mm. This body length has surpassed that of medium and large SUVs such as BMW X6, and is 206mm longer than that of a medium-sized SUV such as Tesla Model Y.

Cost-effective choice, Mercedes-Benz GLE 699,800 can drive home

As a new generation of the Mercedes-Benz family, this car is definitely very attractive, and the overall route is round. In terms of style, the Mercedes-Benz GLE adopts the Mercedes-Benz family style, the front face is very full in the net, the design of the lights on both sides is quite beautiful, and the headlights on both sides look very energetic when lit. Looking at the side lines, the new car adopts the design of the side waist, which lengthens the visual effect of the car to a certain extent, helping to highlight the shape of the Mercedes-Benz GLE. The lateral development of the tail with two large tail lights is even more fashionable. The tail light group is also simple and generous, especially the brake lights, which echo the front daytime lights.

The whole interior can be said to be luxurious and extremely tough. The heated steering wheel is wrapped with leather material, which is practical in texture and touch. When driving, it has a good grip and makes people feel full of power. The above-center console is made of plastic, leather and metal materials, which greatly enhances the class of the whole vehicle. It is equipped with a 12.3-inch central control LCD screen, which has a clear display and a relatively clear design. The front row is also equipped with a dual-temperature zone automatic air conditioning control system, which can freely debug the most comfortable space atmosphere. Mercedes-Benz GLE is equipped with leather seats.

The length of the Mercedes-Benz GLE is 4927mm, the body width reaches 2018mm, the wheelbase is 2995mm, and the standard data is moderate. Among the models of the same class, the wheelbase of the Mercedes-Benz GLE ranks 51st. The sunroof of the Mercedes-Benz GLEGLE 450 4MATIC luxury model provides a larger field of vision, which can create a better visual environment and good sensitivity for the rear passengers, and increase the light intake for the whole vehicle. Among the models of the same price and class, the trunk volume of the Mercedes-Benz GLE ranks 23rd. The space is relatively regular, there are no obvious protrusions, and the overall loading capacity is good.

The Mercedes-Benz GLEGLE 450 4MATIC luxury model uses a 2.5 engine with a maximum horsepower of 367 and a peak torque of 500, which is matched with an automatic (AT) gearbox. The 2.5 engine is paired with a Mercedes-Benz GLE with moderate power performance, low torque is weak and hysteresis can be felt. The official measured zero-hundred acceleration score of the Mercedes-Benz GLE is 5.9S, ranking 117th among SUV models above 800,000.

The Mercedes-Benz GLE has a complete range of active and passive safety features, includingAutomatic parking,Zero tire pressure endurance tires,Automatic parking,Steep slope,uphill assist,Knee airbag,HUD head-up display,Anti-lock braking (ABS),Brake force distribution (EBD/CBC, etc.),Brake assist (EBA/BAS, etc.),Traction control (ASR/TCS, etc.),Active Noise Cancellation,Engine start stop,Side safety air curtain,Mobile phone wireless charging,Night vision system,LED daytime running lights,Front reversing radar,Tire pressure monitoring,Steering wheel heating,Body stability control (ESP/DSC, etc.),Rear reversing radar,Fatigue reminder,Remote parking,Child seat interface,Lane Keeping (LKAS)Wait for the configuration.

Of which,Automatic parkingIt can avoid stepping on the brakes for a long time or needing to pull frequently.Steep slopeIt can safely pass through steep slopes at low speeds.Knee airbagReduce the damage to the occupant’s knee in the vehicle interior during the second collision.

In order to gain a more comprehensive and objective understanding of the Mercedes-Benz GLE, you can go to the Easy Car Mercedes-Benz GLE forum and browse the messages of users who have purchased the car in history.